Thermo-pride MODEL OPA Manuel d'utilisateur télécharger pdf (Page 23)

All installations and services must be performed by qualified service personnel.

Table 3: Suggested Duct Sizes for Homes, Quiet Offices, Or Similar Installations

(Based on a 0.1 in. W.G. static pressure drop per 100 ft. of duct.)

7. The supply and return air ducts, or flexible joints, should be carefully secured

and sealed to the appliance housing to prevent air leakage from, or into, the

duct system. For best performance, insulate the outside surfaces of the ducts

to reduce heat loss from, or heat gain to, the ducts. The insulation system

should be carefully selected and installed to minimize water and moisture

absorption by the insulation.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 90 91

Pas de commentaire

Thermo-pride MODEL OPA Manuel d'utilisateur Page 23